Material Handling Equipment Buying Guide (UAE)
Delta ToolsShare
Use this as your standalone "Buying Guide" page, and pull the shorter intro below onto your collection pages.
Choosing the right material handling equipment comes down to three things: how much weight you're moving, how far and how often, and the surface you're working on. Below is a quick breakdown of the main equipment types we supply, so you can match the right tool to the job before you buy.
Pallet Trolleys & Pallet Trucks
A pallet trolley (also called a pallet truck or pallet jack) is a manual or hydraulic tool used to lift and move palletized loads across flat, hard surfaces — the standard workhorse in warehouses, retail stockrooms, and loading bays.
- Capacity range: 2 to 5 tons for most manual models
- Fork sizes: Standard 1150 x 550mm (Euro-pallet fit) or custom sizes for specific pallet types
- Wheel material: Polyurethane (PU) wheels for smooth indoor floors, nylon for heavier-duty or outdoor use
- Best for: Short-distance moves on flat, smooth flooring
Platform Trolleys
Platform trolleys are flat-bed trolleys used to move loose, boxed, or irregularly shaped goods that don't sit on a pallet — think stock replenishment, office moves, or event setup.
- Capacity range: 150kg to 1000kg depending on frame and wheel spec
- Wheel options: Fixed and swivel castor combinations for tighter turning in aisles
- Best for: Non-palletized loads, frequent short trips, retail and office environments
Stackers
A stacker lifts palletized loads vertically, not just horizontally — used for stacking pallets on racking or loading them onto vehicles at height. Available in manual (hand-hydraulic) or fully electric versions.
- Lift height range: Typically 1.6m to 3.5m
- Capacity range: 1 to 2 tons is standard for most warehouse use
- Best for: Racking, mezzanine loading, and any job that needs vertical lift, not just horizontal movement
Table Lifters (Lift Tables)
Table lifters raise and lower a flat platform to a working height, reducing manual bending and lifting for tasks like packing, assembly, or loading goods onto vehicles at dock height.
- Capacity range: 300kg to 2000kg depending on model
- Lift type: Hydraulic foot-pump, electric, or scissor-lift mechanisms
- Best for: Ergonomic workstations, production lines, and loading dock height-matching
Quick Comparison
| Equipment | Moves loads... | Typical capacity | Best for |
|---|---|---|---|
| Pallet Trolley/Truck | Horizontally | 2–5 tons | Palletized goods, flat floors |
| Platform Trolley | Horizontally | 150kg–1 ton | Loose/boxed goods |
| Stacker | Vertically + horizontally | 1–2 tons | Racking, loading at height |
| Table Lifter | Vertically (stationary) | 300kg–2 tons | Ergonomic lifting, assembly |
Frequently Asked Questions
What's the difference between a pallet trolley and a pallet truck?
They're the same thing — "pallet trolley" and "pallet truck" (also called a pallet jack) are used interchangeably in the UAE market.
Do I need a manual or electric stacker?
Manual (hand-hydraulic) stackers suit occasional use and lighter loads. Electric stackers are worth the extra cost if you're lifting frequently throughout the day or handling loads above 1.5 tons.
What floor type do I need for a pallet trolley?
Standard PU-wheeled pallet trolleys need flat, smooth, hard flooring (concrete, epoxy, tile). For rougher or outdoor surfaces, nylon or rubber wheels handle better.
Can platform trolleys carry irregular loads?
Yes — that's their main advantage over pallet trucks. Just make sure the load is centered and doesn't exceed the trolley's rated capacity.
Shop by Category
Browse our full range of material handling equipment
At Delta Industrial Tools Co. LLC, we supply the full range of material handling equipment suited for UAE conditions — from pallet trolleys and hand trucks to stackers and table lifters. Contact our technical team today to find the right products for your application.
📞 Call us: +971 6 533 6171
🌐 Website: www.deltatools.ae | www.deltatoolsuae.com
📧 Email: info@deltatools.ae
